iSymphony SP5BT - Manual (Page 11)

SP5BT User Manual
11
The docking base and headset can be charged together or separately, using
the included AC adapter, car adapter or PC USB cable. Additionally, the
docking base can recharge the headset without any external power source.
To charge the SP5BT docking base and/or headset:
1) Connect the charging cable to the charging port on the headset or
docking base.
2) Dock the headset into the docking base if you wish to charge both
devices together. Slide the CHARGE switch on the docking base to
the right.
3) Connect the other end of the charging cable to the AC adapter, car
adapter or the USB port of your PC. Charging is indicated by a red
LED on the docking base or a red LED on the headset.
4) Allow the headset and/or docking base to charge completely. The
normal charging time is 2-6.5 hours. Charging is complete when
the charging LED turns off. Please note that charging over USB will
take longer than using an AC adapter or car adapter.
5) When charging is complete, slide the CHARGE switch on the
docking base to the left (OFF) to extend the standby time of the
base.
Charging the headset Charging the docking base
CHARGING