InFocus IN100 - Manual (Page 39)

Operation 39
Description of each menu
FUNCTION DESCRIPTION
Wall Color
Corrects the projected picture’s color when the projection
surface is not white. See
"Using Wall Color" on page 30 for
details.
Aspect Ratio
There are four options to set the image's aspect ratio
depending on your input signal source. See
"Selecting the
aspect ratio" on page 27 for details.
Keystone Corrects any keystoning of the image. See "Correcting
keystone" on page 26 for details.
Position
Displays the position adjustment page. To move the projected
image, use the directional arrow keys. The values shown on the
lower position of the page change with every key press you
made until they reach their maximum or minimum.
Phase
Adjusts the clock phase to reduce image
distortion.
The function is only available when a PC
signal (analog RGB) is selected.
H. Size
Adjusts the horizontal width of the image.
The function is only available when a PC signal (analog RGB) is
selected.
Digital Zoom Magnifies or reduces the projected image. See "Magnifying and
searching for details" on page 27 for details.
3D Sync
This projector features a 3D function which enables you to
enjoy 3D movies, videos, and sporting events in a more realistic
way by presenting the depth of the images. You need to wear a
pair of 3D glasses to view the 3D images.
• For a PC type signal:
When the vertical frequency is 120Hz, and the content being
projected is made with 3D technology, selecting
On will present
the 3D images.
• For a video type signal:
When the content being projected is made with 3D technology,
selecting
On will present the 3D images.
When the 3D Sync function is on:
•The brightness level of the projected image will decrease.
•The Preset Mode cannot be adjusted.
•The Keystone can only be adjusted within limited degrees.
•The Digital Zoom can only magnify the pictures to limited sizes.
3D Sync
Invert
When you discover the inversion of the image depth, enable
this function to correct the problem.
1. DISPLAY
menu