InFocus IN100 - Manual (Page 43)

Operation 43
FUNCTION DESCRIPTION
VGA Out
Selecting On enables the function. The projector can output a
VGA signal when it is in standby mode and the D-SUB IN and
D-SUB OUT sockets are correctly connected to devices. See
"Connecting a monitor" on page 15 for how to make the
connection.
Enabling this function slightly increases the standby power
consumption.
Lamp
Settings
Lamp mode
See
"Setting Lamp mode as Economic" on page 45 for details.
Reset lamp timer
See
"Resetting the lamp timer" on page 49 for details.
Equivalent lamp hour
S
ee "Getting to know the lamp hour" on page 45 for details
on how the total lamp hour is calculated.
Security
Settings
Change password
You will be asked to enter the current password before
changing to a new one.
Power on lock
See
"Utilizing the password function" on page 22 for details.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User, Language, Projector Position, High Altitude Mode,
Security Settings.
Current
System
Status
Source
Shows the current signal source.
Preset Mode
Shows the selected mode in the
PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
5. S
YSTEM
SETUP: Advanced menu
6. INFORMATION m
enu