ISEKI CISCO SYSTEMS OL-5450-10 - Manual (Page 49)

49
Release Notes for VPN Client, Release 4.0 through Release 4.0.5.D
OL-5450-10
Open Caveats
This is most likely to happen when Start Before Logon and Auto Initiate are
being used on a Windows NT/2000/XP system.
Workaround:
This is due to the fact that the VPN Client dialer is already running on the
“logon desktop”. Most likely during Windows logon the dialer launched and
posted an error, the Windows logon was completed and the error was never
closed. To work around this error, do the following:
Step 1 Press CTRL+ALT+DEL to get to the logon desktop.
Step 2 Look for and close any VPN Client error dialogs.
Step 3 Press ESC to return to the normal Windows desktop; the VPN Client should load
normally.
• CSCdy14218
During installation of the VPN Client on a PC that already has the Enternet
v.1.5c or v. 1.5c SP2, the following error might appear:
“SVCHOST.EXE has generated errors and will be closed by Windows.”
Workaround:
If this message appears, click OK, then reboot the PC when the VPN Client
prompts for the reboot. After this, The message does not reappear and all
connections work fine.
• CSCdy50648
InstallShield's “Tuner” application produces warnings and errors when
validating the Cisco MSI installation package.
• CSCdy68888
On a Windows 98 PC that has the Sygate Personal Firewall, the following
message may appear in the VPN Client log file:
“Packet size greater than ip header”
This message does not interfere with the VPN Client’s ability to pass data and
can be ignored.