ISEKI CISCO SYSTEMS OL-5450-10 - Manual (Page 7)

7
Release Notes for VPN Client, Release 4.0 through Release 4.0.5.D
OL-5450-10
Installation Notes
Installation Notes - Windows Platforms
In addition to the installation considerations for Release 4.0.3, Release 4.0.x
includes the following installation considerations for Windows users:
Installing the VPN Client Software Using InstallShield
Installing the VPN Client software on Windows NT, Windows 2000, or Windows
XP with InstallShield requires Administrator privileges. If you do not have
Administrator privileges, you must have someone who has Administrator
privileges install the product for you.
Note The VPN Client Installer does not allow installations from a network drive
(CSCeb43490).
Installing the VPN Client Software Using the MSI Installer
If you are using the MSI installer, you must have Windows NT-based products
such as Windows NT 4.0 (with SP6), Windows 2000, or Windows XP. Installing
with MSI also requires Administrator privileges.
Note Windows Installer 2.0 must be installed on a Windows NT or Windows 2000 PC
before configuring the PC for a Restricted User with Elevated Privileges
(CSCea37900).
VPN Client Installation Using Windows Installer (MSI) Requires Windows NT SP6
When you attempt to install the VPN Client using MSI install (vpnclient_en.exe)
on NT SP3, SP4, or SP5, the error messages do not indicate that the VPN Client
cannot be installed on those operating systems because they are unsupported.
Once the errors occur, no other messages are displayed and the installation is
aborted.
When you attempt to run vpnclient_en.exe on Windows NT SP3, SP4, or SP5 you
see the following messages: