ISEKI CISCO SYSTEMS OL-5450-10 - Manual (Page 59)

59
Release Notes for VPN Client, Release 4.0 through Release 4.0.5.D
OL-5450-10
Caveats Resolved in Release 4.0.5.D
Caveats Resolved in Release 4.0.5.D
Release 4.0.5.D resolves the following issues:
• CSCed49306
If a user is member of at least 500 groups in the domain (Win2000), the VPN
Client cannot open a connection. A message in the log says that the certificate
could not be retrieved because the store is empty. The same user can connect
without a problem if the number of groups he belongs to is less than 500.
• CSCef69451
An error is generated on the VPN Client when trying to connect after a
certificate renewal is performed:
"Error 31: The certificate "User Name" associated with this Connection Entry
no longer exists or failed to open. Please select another certificate."
• CSCef82642
The VPN Client software is unable to verify some user certificates.
• CSCeg14196
This was introduced in 4.0.3.C. If the user has more than 10 certificates, and
wants to select a certificate number 10 or higher, the wrong certificate is
selected.
• CSCeg30023
The VPN Client's DPD processing is correct, but it was logging the wrong
DPD sequence number in the logs.
• CSCsa41980
In rare cases in which IKE packets are fragmented and received out of order,
it is possible for the Cisco VPN Client to terminate abruptly.
• CSCsa42416
If Netopia's NetOctopus is installed on the host, the Cisco VPN Client cannot
disable the Virtual Adapter at tunnel disconnect.