iOptron SmartStar MiniTower Pro - Manual (Page 45)

45
Calibrate mount. Current Right Ascension and Declination become the commanded Right
Ascension and Declination. This command synchronizes HC coordinate to commanded
coordinate. No GOTO needs to be done first.
Command: :Sr HH:MM:SS.S#
Response: “1”
Define the commanded Right Ascension, RA.
Command: :Sd sDD*MM:SS#
Response: “1”
Define the commanded Declination.
Miscellaneous
Command: :F+# :F-# :FF# :FS# :FQ#
Response: (none)
Advances (F+) or retracts (F-) focus adjust motor on the eyepiece. F+ or F- commands
commence adjustment and :FQ# stops it. If :FS# has been issued previously, then the
focus adjustment will be slow. If the :FF# command has been issued, then the
adjustment will be fast. If neither FF nor FS is specified, the power up default of FS is
assumed.
Command: :F1# :F2# :F3# :F4#
Response: (none)
Set the focus speed to 1.2,3,4, from slow to fast.
Command: :V#
Response: (current servo controller software RS232 command language
version number)
This command returns the current servo controller software RS232 command language
version.
Command: :Vs#
Response: (current servo controller software infomation)
This command returns the current servo controller software information.
Command: :STR0#,:STR1#,:STR2#
Response: ‘1’
This command sets the track rate.
0 - sidereal
1- solar
2- lunar
Command: :GTR#
Response: ‘0’,’1’,’2’
This command gets the current tracking rate.