Connecting the cdc-3.4 – Integra CDC-3.4 User Manual

Page 11

Advertising
background image

11

Connecting the CDC-3.4

• Read the manuals supplied with your other audio

equipment.

• Don’t connect the power cord until you’ve completed

all audio connections.

The CDC-3.4 has analog and digital (coaxial and opti-
cal) audio outputs. The digital outputs offer the best
audio quality, so if your digital recorder or amp has a
digital input you should use it.

ANALOG AUDIO OUTPUT

If your hi-fi amp or AV receiver doesn’t have a digital
input, use the supplied RCA/phono audio connecting
cable to connect the CDC-3.4’s ANALOG AUDIO
OUTPUTs to your amp’s analog CD inputs.

Notes:

• RCA/phono audio connecting cables are usually color

coded: red and white. Use red plugs to connect right-
channel inputs and outputs, and use white plugs to
connect left-channel inputs and outputs.

• Push each plug in all the way to

make a good connection (loose
connections can cause noise or
malfunctions).

• To prevent interference, keep

audio cables away from power
cords and speaker cables.

DIGITAL AUDIO OUTPUT

If your CD-R, MiniDisc, or DAT recorder has a digital
input, use a commercially available coaxial or optical
fiber digital audio cable to connect the CDC-3.4’s
COAXIAL or OPTICAL DIGITAL AUDIO OUTPUT
to your recorder.
You can also use the digital outputs to connect to an amp
that has a digital input, for the best audio quality.

Notes:

• With MP3 tracks, the digital outputs only work if the

sampling rate is 32 kHz, 44.1 kHz, or 48 kHz.

• The OPTICAL DIGITAL AUDIO

OUTPUT has a dust cap for keep-
ing out dust and dirt when it’s not
in use. Remove the cap before
connecting an optical fiber cable.
Push the plug in all the way to
make a good connection. Keep the
dust cap in a safe place for future use.

Audio Connections

Right!

Wrong!

IR

OUT

IN

RS

232

AC INLET

RCA/phono
audio con-
necting cable

Optical fiber cable

(not supplied)

CD-R, MiniDisc, DAT recorder

or digital amp

Hi-fi amp, AV receiver

Optical IN

CD

R

L

Connect one or
the other

Coaxial IN

Coaxial cable
(not supplied)

Connect one
or the other

Optical IN

Coaxial IN

Coaxial cable

(not supplied)

Advertising
This manual is related to the following products: