Icom IC-F3061S - Manual (Page 52)

6 - 4
5-2 FREQUENCY ADJUSTMENT
Select an adjustment item using [ ↑] / [↓] keys, then set to the specifi ed value using [←] / [→] keys on the connected PC’s keyboard.
ADJUSTMENT ADJUSTMENT CONDITION
MEASUREMENT
VALUE
UNIT OPERATION
PLL LOCK
VOLTAGE
[RX LVA1] 1 • Channel
• Lock voltage preset
[LV (RX1)]
• Receiving
: 1
: 51 [1.00 V]
PC
screen
Click [I/O Check] in the Clone
menu to open the “I/O Check
window.”
Click [Update (F5)] button, then
check the “LVIN” item on the
CS-F3060 ADJ’s screen as below. 1.00 V
[RX LVA2] 2 • Channel
• Lock voltage preset
[LV (RX2)]
• Receiving
: 2
: 51 [1.00 V]
[TX LVA] 3 • Channel
• Lock voltage preset
[LV (TX)]
• Transmitting
: 1
: 51 [1.00 V]
PLL LOCK
VOLTAGE 1 • Channel
• Receiving
: 4 PC
screen
Click [Update (F5)] button, then
check the “LVIN” item on the
CS-F3060 ADJ’s screen. 3.4–4.4 V
(Verify)
2 • Channel
• Receiving
: 3
3 • Channel
• Transmitting
: 3
REFERENCE
FREQUENCY
[REF] • Channel : 3 Top
panel
Loosely couple a frequency
counter to the antenna connec-
tor. 470.000000 MHz
(Low band)
520.000000 MHz
(High band)
• Connect an RF power meter to the
antenna connector.
• Transmitting
,OCK
• I/O Check window