IBM CP-X445 - Manual (Page 43)

43
4.
If you modified the IP configuration or the DHCP setting, click on "Reboot" in Screen 2
to have the settings take effect.
5.
Close the Web browser to end the configuration session.
Multifunctional settings
NETWORK Menu (continued)
NOTE • If the Projector Network Configuration dialog is accessed by more than one
computer at the same time, the last computer to login retains the authority to modify the
settings. If you wish to make changes using a computer that logged on earlier, you will
need to login again to regain authority.
• Except for the login screen, all of the screens will timeout after 10 minutes of no
operation. Should this occur, you will need to login again to modify the settings.
• The 10-minute timeout remains in effect even if you close the Web browser and end
the configuration session. Therefore, if you try to reestablish a session from the same
computer before the 10-minute timeout occurs, the login screen will not reappear.
However, if you reboot or if you login from another PC, the 10-minute timeout will no
longer be in effect.