Jwin JX-CD561 - Manual (Page 10)

Portable AM/FM Radio and CD Player V10M10_IM_EN_12262006
www.jWIN.com - 8 -
OPERATIONAL INSTRUCTIONS
Playing an MP3 Disc
1. Set the FUNCTION SWITCH to the “CD” position.
2. Open
the CD DOOR by pulling up the CD DOOR. Put a MP3 disc into
the CD compartment and close the CD DOOR. Ensure the CD DOOR
is closed properly and locked in place.
When the CD DOOR is closed with an MP3 disc inside, total
number of the MP3 files in the disc will be shown on the LCD
DISPLAY and go to the stop mode. The “DISC” indication will
always be shown on the DISPLAY.
If there is no disc inside, the DISPLAY will show “no” and go to the stop mode. If the CD
DOOR is not closed, the DISPLAY will show “– – –”.
3. Press
the PLAY/PAUSE BUTTON (
X||) to start playing the
MP3 CD.
When the PLAY/PAUSE BUTTON (
X||) is pressed, the first
track will be played. The play “
X” and “MP3” indications will be shown as well to indicate
an MP3 disc is being played. The LCD will show the specific track number being played.
4. Press
the PLAY/PAUSE BUTTON (
X||) to interrupt the playback in the play mode. To
resume the playback, press it once again.
Repeat and Random
1. Repeat 1:
When the MODE BUTTON is pressed once, the Repeat 1
indication “REP.” will be shown on the LCD, and this single
MP3 file will be repeated.
2.
Repeat Folder:
When the MODE BUTTON is pressed twice, the “REP.” and
“ALBUM” indications will be shown. This specific folder will be
played repeatedly. The folder number and the MP3 file number
will be shown every 2 seconds alternatively.
3.
Repeat All:
When the MODE BUTTON is pressed three times, the Repeat
All indication “
” will be shown. The whole disc can be
played continuously.
4.
Random:
When the MODE BUTTON is pressed four times, the
“RANDOM” indication will be shown. This feature allows the
MP3 files on the disc to be played in a random order.
5.
To cancel the Repeat/Random Function:
Press the MODE BUTTON repeatedly until the Repeat/Random indication disappears
from the LCD DISPLAY.