Jwin JX-CD561 - Manual (Page 14)

Portable AM/FM Radio and CD Player V10M10_IM_EN_12262006
www.jWIN.com - 12 -
OPERATIONAL INSTRUCTIONS
Playing an Audio CD (CD-R/RW Playback Compatible)
1. Set the FUNCTION SWITCH to the “CD” position.
2. Open
the CD DOOR by pulling up the CD DOOR. Put an Audio CD
into the CD compartment and close the CD DOOR. Ensure the CD
DOOR is closed properly and locked in place.
When the CD DOOR is closed with an Audio CD inside, total
number of the tracks in the disc will be shown on the LCD
DISPLAY and go to the stop mode. (ex. Total 17 tracks on the
disc) The “DISC” indication will always be shown on the
DISPLAY.
If there is no disc inside, the DISPLAY will show “no” and go to
the stop mode.
If the CD DOOR is not closed, the DISPLAY will show “– – –”.
3. Press
the PLAY/PAUSE BUTTON (
X||) to start playing the
Audio CD.
When the PLAY/PAUSE BUTTON (
X||) is pressed, the first
track will be played. The play “
X” indication and the specific
track number being played will be shown on the LCD.
4. Press
the PLAY/PAUSE BUTTON (
X||) to interrupt the playback in the play mode. To
resume the playback, press it once again.
Repeat and Random
1. Repeat 1: When the MODE BUTTON is pressed once, the
Repeat 1 indication “REP.” will be shown on the LCD and this
single track of music will be repeated.
2.
Repeat All: When the MODE BUTTON is pressed twice, the
Repeat All indication “
” will be shown. The whole disc can
be played continuously.
3.
Random: When the MODE BUTTON is pressed three times,
the “RANDOM” indication will be shown. This feature allows the
tracks on the disc to be played in a random order.
4.
To cancel the Repeat/Random Function: Press the MODE BUTTON repeatedly until the
Repeat/Random indication disappears from the LCD DISPLAY.
Skip and Search
1. Press the SKIP/SEARCH FORWARD ( ) or BACKWARD ( ) BUTTON to skip to the
next or previous MP3 file.
2.
Press and hold the SKIP/SEARCH FORWARD ( ) or BACKWARD ( ) BUTTON to
search the track with audible high speed forward or backward playback.