Jwin JX-CD561 - Manual (Page 9)

Portable AM/FM Radio and CD Player V10M10_IM_EN_12262006
www.jWIN.com - 7 -
GETTING STARTED
Location of Controls – Continued
1.
FUNCTION SWITCH (AUX/CD/OFF/RADIO)
2. BAND SWITCH (AM/FM/FM ST)
3. FM TELESCOPIC ANTENNA
4. CD DOOR
5. TUNING KNOB
6. BASS BOOST BUTTON
7. CD SKIP/SEARCH FORWARD BUTTON
8. CD SKIP/SEARCH BACKWARD BUTTON
9. CD PROGRAM BUTTON
10. CD MODE BUTTON
11. CD STOP BUTTON
12. CD PLAY/PAUSE BUTTON
13. LCD DISPLAY
14. STEREO HEADPHONE JACK
15. VOLUME CONTROL KNOB
16. AC
SOCKET
17. BATTERY DOOR (BOTTOM)
18. AUX IN JACK
19. SPEAKER
LEFT
20. SPEAKER RIGHT
21. FOLDER BUTTON
22. CD / SD / USB BUTTON
23. USB
PORT
24. SD / MMC SLOT
AC Operation
Before operation, please be sure that the voltage on the set corresponds to the voltage of your
local area. Unravel the AC line cord, and insert one end into the AC jack on the set and the
other end into a standard AC outlet.
Notes:
1) In case of malfunction due to electrostatic discharge (ESD), reset the unit by
reconnecting the AC cord again to resume to normal operation.
2) When not in use – Unplug the AC power cord completely from the AC power socket.
Installing the Batteries
Disconnect the AC Cord Set completely. Open the BATTERY DOOR and insert eight “C” or
“UM-2” size batteries (not supplied) making sure that the indicated battery polarity is observed.
When not in use – Remove all the batteries if the unit will not be used for several months or
more.