JVC TK-C215VP4U/E - Manual (Page 29)

29
ⅷ Registering alarm position
For registering the angle of view during
monitoring when there is an alarm input.
1.
Check that the [ALARM POSITION]
indicator light is turned on.
Registration of alarm position is enabled.
● Press the [POSITION SELECT] button if the
[ALARM POSITION] indicator light is off.
2.
Adjust the image size. ( A Pg. 28)
3.
Press the [MEMORY] button for 2 seconds
or longer.
The [ALARM POSITION] indicator light blinks for
3 times (green)
ALARM position registration is completed
4.
Adjust the brightness. ( A Pg. 28)
5.
Press the [POSITION SELECT] button.
The camera returns to the home position
Note:
● Be sure to return the camera to the home
position after registration of the alarm
position is completed.
In addition to pressing the [POSITION
SELECT] button, you can also use the power
ON/OFF button to return the camera to the
home position.
● To check images at the registered home
position or alarm position, press the
[POSITION SELECT] button. Press this
button to switch between the image at the
home and alarm positions.
Ň
B
RESET/[SPOT]
LL
PHASE
R
WHT.BAL.
H
L
IRIS LEVEL
ZOOM/FOCUS FAR
WIDE
NEAR
POSITION SELECT
POSITION ALARM
[MEMORY]
2
4
1
2
3
4
5
6
7
8
TELE
3.
1.,5.
2.,4.
TK-C215VP4_JP.book Page 29 Thursday, November 2, 2006 10:51 AM