JVC TK-C215VP4U/E User Manual

Page 6

Advertising
background image

6

Introduction

Introduction

Safety Precautions .................................... 3

Characteristics .......................................... 5

Table of Contents ...................................... 6
Precautions for proper use of this product ... 7

Name of Parts ........................................... 9

Setting the Switches and the Lens

(TK-C215VP4U/E) ................................ 12

Setting the Switches and the Lens

(TK-C215VP12U/E) .............................. 14

Installation and Connection

System Example ..................................... 16

About Connection Cables ....................... 17

Video signal cables ............................. 17
DC 12 V or AC 24 V

power supply cable ......................... 17

Electrical Specifications of

Alarm Input Terminals ..................... 18

The right sequence to connect and set the

camera ................................................. 19

Setting the switches ................................ 20
Mounting the base .................................. 21

Cable Connection ................................... 22

Mounting the camera unit ....................... 23
Adjusting the video image ...................... 25

Mounting the inner dome ........................ 30

Mounting the dome cover ....................... 30
Mounting the camera using

the electrical box .................................. 31

Mounting the camera using the pipe ...... 32

White-spot correction .............................. 34

Others

Specifications ......................................... 36

Table of Contents

ⅷ Before starting an important recording, be

sure to perform a test recording in order to
confirm that a normal recording is possible.

ⅷ We will not provide any compensation

whatsoever for the contents to be recorded or
loss of opportunities when recording is not
properly performed due to malfunction of the
video camera, VTR, hard disk recorder or
video tape.

ⅷ Before touching the camera unit, make sure

to touch the metal surface of the [MONITOR]
terminal to discharge any static electricity
from your body. Static electricity may cause
the camera to malfunction.

TK-C215VP4_JP.book Page 6 Thursday, November 2, 2006 10:51 AM

Advertising
This manual is related to the following products: