JVC VN-V25U - Manual (Page 41)

41
Note:
● To use the built-in MPEG4 Viewer of VN-V25U/26U, install “ffdshow” that is open source codec. You
can download “ffdshow” from the Internet.
A DisplaySize Switches the display size. (VGA or QVGA)
B Pause Pauses/Resumes playback of motion images.
C Setup Displays the built-in viewer settings window.
This setting screen is used to set the built-in viewer as a software on the
computer.
Caution:
● Settings on this setting screen do not affect settings of the VN-V25U/
26U unit.
D Speech
(VN-V26U only) Starts sending audio to VN-V26U from the client PC. Only one stream of
audio can be sent for one unit of VN-V26U. You cannot send audio from
a different client PC when transmission of audio from a client PC is in
progress.
● The [Speech] button lights up in red during audio transmission.
● [Speech] button will not blink in red when audio cannot be sent.
Note:
● The JPEG and MPEG4 viewers cannot send audio at the same time.
E Audio Setup
(VN-V26U only) The audio setting screen appears.
Caution:
● Settings on this setting screen do not affect settings of the VN-V26U
unit.
VN-V25U_26U_EN.book Page 41 Monday, January 21, 2008 10:13 AM