JVC VN-685U - Manual (Page 109)

109
Ⅵ Auto Pan This item sets the Auto Pan operation which moves at a specific speed from
the preset [Start].
A Mode Select the [Mode] of the Auto Pan operation.
Right : This rotates the camera horizontally in the right direction from
the [Start Position].
Left : This rotates the camera horizontally in the left direction from the
[Start Position].
Return : Moves between [Start Position] and [Start Position] in the
clockwise direction from the [Start Position] toward the [Return
Position].
You can specify any random position as the start and return
positions except under the following conditions.
Tilt angle of 90 ° or larger
: An error message appears if the angle is set to 90 ° or larger.
Electronic zoom area
: When setting is performed using the electronic zoom area,
optical zoom is automatically set to its largest magnification
ratio.
Memo :
● If the zoom ratio between the [Start Position] and [Return Position] is
different from each other, linked operations between zoom and pan/tilt
may not be even.
A Speed Select the Auto Pan operation speed.
[Setting value:Low, Mid, High]
B Start
Position
Return
Position
Select the [Start Position] and [Return Position] (only during AReturnB) of the
operation. Operate the camera manually, decide on a position and click
[Apply] to register. Click [Go To] to move the camera to the registered
position.
Memo :
● For details on the manual operation, see [PTZ Control] (A Page 113).