JVC VN-685U - Manual (Page 17)

17
Alarm
This unit comes with a motion detection feature
and dual alarm input.
During motion detection or alarm input, actions
such as mail delivery, message transmission via
TCP/UDP, alarm output, moving to a preset
position, and changing of B&W mode settings
can be triggered. These actions can also be
triggered by combination of two alarm inputs.
Installing an FTP server enables uploading of
JPEG images before and after the alarm input
time (pre-/post-recording) to the server.
AAlarm PageB (APage58)
AJPEG Viewer SettingsB (APage118)
Restrictions on Clients
This unit enables users to authorize or reject the
acquisition of images by specific IP address.
(
A Page 84)
Control via customized application
software
The following uses are also possible by
developing a customized application software
that supports the API of this unit.
For details, please refer to [API GUIDE] in the
supplied CD-ROM.
● Monitors via the computer while at the same
time records images to the HDD of the
computer.
● Performs recording by changing the frame
size/frame rate during alarm occurrence.
● Records the type and time of alarm
occurrence on the computer.
Computer
Sending JPEG images
before and after alarm
input to FTP
Alarm Device
Network
camera