JVC VN-685U - Manual (Page 85)

85
Note:
● Note that when AallowB is selected and all IP address fields are left blank, JPEG/MPEG4 acquisition
by all IP addresses will be denied. Restrictions are not imposed on access to the Web Settings
page.
Additionally, the camera will also deny access when instructions for transmission to the specified IP
address are sent via API.
Memo :
● To specify a specific IP address range, enter a combination of the IP address and subnet mask in
the [IP Address] item B field.
● Define the subnet mask using a length between 8 to 30 bits.
For example, a range between 192.168.0.0 to 192.168.0.255 is denoted as 192.168.0.0/24
([IP Address]/[bit length of subnet mask]).
Destination
Address Restrictions may be imposed on clients accessing the camera using the IP
address.
A Access
Restrictions When AdenyB is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item B will be denied. Restrictions are not
imposed on access to the Web Settings page.
When
AallowB is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item B will be permitted. Restrictions are not
imposed on access to the Web Settings page.
B IP Address When a multicast address is specified and AdenyB is selected, the camera
will deny transmission to this multicast address.
When a multicast address is specified and
AallowB is selected, the camera
will only accept transmission to this multicast address and deny transmission
to multicast addresses that are not stated in the [IP Address] item B field.