JVC VN-685U - Manual (Page 11)

11
Disclaimer
ⅷ The Automatic Tracking, Intelligent Tracking, and
Motion Detection features are not features to
prevent theft or fire. Our company shall not be
liable for any inconveniences or failures that occur.
ⅷ We shall not be responsible for any
inconveniences or disturbances caused in the
event of privacy invasion as a result of camera
footages of this product.
Transportation
ⅷ Do not throw away the original box of the unit.
Keep it and use it for transporting the unit in
future.
ⅷ As the camera unit is of an easily rotatable
structure, secure the camera unit inside the
dome cover such that it does not rotate
before transporting. Otherwise, an error may
occur during camera operation.
A Face the heat release vents upward and
secure the lens section with tape.
B Insert cushioning material wrapped with air
caps (approx. 50 mm x 200 mm) at two
opposite sides of the camera.
ⅷ When attaching the ceiling clamping bracket
to the camera unit before transporting, pull
out the tip of the fall prevention wire to
prevent it from being caught between the
camera and clamping bracket. Otherwise, it
may be difficult to detach the bracket from the
camera. (VN-V685U/VN-V686BU)
A
B
A
B
Cushioning material
Secure
with tape
Pull out the tip of the fall
prevention wire
ⅥVN-V685U/VN-V686BU
ⅥVN-V686WPBU
Cushioning material
Secure
with tape