JVC VN-685U - Manual (Page 13)

13
VN-V685U/VN-V686BU
Ⅵ Ceiling mount section
A Fixing holes (x3)
This hole is for mounting the ceiling clamping bracket to
the ceiling or the ceiling recessed bracket (WB-S685:
Sold separately).
B [AC24V HINPUT] AC 24 V Input terminal
This connects the camera to AC 24 V power.
C [10BASE-T/100BASE-TX] LAN cable connection
terminal
This connects the unit to the network.
It supports PoE (IEEE802.3af) and enables you to use
this camera without having to connect to a power supply
using a power cord.
PoE: class0 (
A Page 24)
D Alarm input/Alarm output terminal
This terminal is for alarm input/alarm output.
(
A Page 25)
E Fall prevention wire fixing bracket
This attaches to the fall prevention wire J of the camera.
F Wire clamp fixing hole
This is used to bundle wires. ( A Page 19)
G Fall prevention wire mounting hole
Mount wires from the ceiling slab or channel to this hole
to prevent the camera from falling.
H Power indicator
The indicator lights up in green when AC 24 V power/
PoE power is turned on.
I [Mac address] indication
The MAC address is a unique physical address of the
product. This address cannot be altered.
J Camera connection terminal (female)
This connects to the connection terminal (male) of the
camera.
Name and Function of Parts
B
D
C F
E
G
A
H Terminal
J
I
Reverse side
Pin number Signal Name
1 Input 1
2 Input 1 COM
3 Input 2
4 Input 2 COM
5 Output 1
6 Output 1 COM
7 Output 2
8 Output 2 COM