Ip address setting for the camera, Step4 ip address setting for the camera, Ip address settings (continued) – JVC VN-685U User Manual
Page 42: Ab c
42
Network SettingNetwork Setting
IP address setting for the camera
1
Click [Advanced Settings] of the Built-in Viewer
2
The [Basic Settings1] screen appears
A Specify the [DHCP Disable].
● When selecting ADHCP EnableB:
The default setting is
ADHCP EnableB (DHCP client function is Enabled). To assign an IP
address from the DHCP server, connect the DHCP server to the LAN, set the [DHCP Disable] of
the camera to
ADHCP EnableB, and click the [OK] button. For details on IP addresses assigned
to the camera, consult your network administrator.
● When selecting ADHCP EnableB:
Select
ADHCP EnableB, and specify a value in the [IP address], [Subnet Mask] and [Default
Gateway] fields.
Note:
● Set the DHCP server such that the same IP address is always assigned to the MAC address of the
camera by the DHCP server. Connection may fail if the above setting is not performed.
IP Address Settings
(continued)
Click
A
B
C