JVC VN-685U - Manual (Page 56)

56
Setting Using Internet Explorer
Encoding Page
This page is for setting JPEG and MPEG4 encoding parameters.
This page can be used during access using AadminB or AoperatorB.
● Click [Advanced Settings] to display setting menu.
● Click [Encoding]. Press the [OK] button to enable the new settings. Press the [OK] button to enable
the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● When settings on this page are altered during playback using Built-in Viewer, reboot the Built-in
Viewer.
● There is a maximum limit to the bit rate for transmission by the camera. If a bit rate that exceeds the
maximum limit is specified, this new setting will not be applied. For details on the maximum
transmission limit, refer to [Network Requirements] (
A Page 33).
Setting (continued)
A
B
C D E F G
Click
A Frame Size For setting the frame size of each JPEG or MPEG4 screen to AVGAB (640 x
480) or AQVGAB (320 x 240).
Select one of the four different patterns.