Receiving radio broadcasts – JVC RX-884RBK User Manual

Page 29

Advertising
background image

24

English

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular
station.

IMPORTANT:

When using the Remote Control, check to see if its remote control
mode selector is set to the correct position:
To operate this receiver, set it to “AUDIO/TV/VCR” (except when
selecting the DBS tuner as the source).

Tuning in Stations Manually

On the front panel

only:

1. Press FM/AM TUNING to select the band.

Each time you press the button, the band alternates between
FM and AM (MW/LW).

2. Turn MULTI JOG until you find the frequency you

want.
• Turning it clockwise increases the frequency.
• Turning it counterclockwise decreases the frequency.

Using Preset Tuning

Once a station is assigned to a channel number, the station can be quickly tuned. You
can preset up to 40 stations at random.

To store the preset stations

On the front panel

only:

1. Tune in the station you want to preset (see above).

If you want to store the FM reception mode for this station, select the FM reception
mode you want. See page 25 for details.

2. Press TUNER/SEA MEMORY.

“CH-” appears and the channel number position starts flashing
on the display for about 5 seconds.

3. Turn MULTI JOG to select a channel number while

the channel number position is flashing.

4. Press TUNER/SEA MEMORY again while the

selected channel number is flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.

FM/AM TUNING

MULTI JOG

Notes:

• When you turn MULTI JOG

quickly in step 2, the
frequency keeps changing
until a station is tuned in.

• When a station of sufficient

signal strength is tuned in, the
TUNED indicator lights up on
the display.
When an FM stereo program
is received, the STEREO
indicator also lights up.

AUDIO/TV
/VCR

CATV
/DBS

TUNER

/SEA

MEMORY

TUNER

/SEA

MEMORY

MULTI JOG

Continued to the next page.

Note:

You can use the 10 keys on the
remote control to select the
preset number. When using the
10 keys, be sure that they are
activated for tuner, not for the
CD and others. (See page 63.)

EN24_33.RX-884R[E]/1.PM5

98.3.26, 0:07 PM

24

Advertising