JVC RX-884RBK - Manual (Page 38)

33
English
Creating Your Own SEA Mode
You can adjust and store your own SEA adjustment into memory (SEA USERMODE).
On the front panel only:
If you do not want to store your adjustment, but rather want to adjust the SEA
temporarily, skip step 4 below.
1. Press SEA ADJUST repeatedly until the frequency range
(100Hz, 1kHz or 10kHz) you want appears on the display.
2. Turn MULTI JOG to adjust the SEA level of the selected
frequency range, while the indication of the previous step is
still on the display.
• Turning it clockwise increases the level.
• Turning it counterclockwise decreases the level.
3. Repeat step 1 and 2 to adjust other frequency ranges if
necessary.
4. Press TUNER/SEA MEMORY, while the indication of the
previous step is still on the display.
Your adjustment is stored into the SEA USERMODE.
To recall your own SEA adjustment
See page 32.
To erase a stored adjustment
Storing a new adjustment into SEA USERMODE erases the previously stored one.
SEA ADJUST
MULTI JOG
100 1k 10k
VOLUME
FR S E A
100 1k 10k
VOLUME
FR S E A
Using the SEA Modes
100 1k 10k
FR S E A
This FR means this adjustment can be
applied to the front speakers only
TUNER/ SEA MEMORY
EN24_33.RX-884R[E]/1.PM5 98.3.26, 0:08 PM 33