JVC RX-884RBK - Manual (Page 54)

49
English
MAIN MENU
SOUND CONTROL menu
SOUND CONTROL
SURROUND LEVEL
SEA
BAL.:R-21
LOUDNESS : OFF
INPUT ATT : NORMAL
SUBWFR LEVEL: 0dB
NEXT PAGE
:OPERATE
** **
** **
Using the On-Screen Menus
Adjusting the Subwoofer Output Level (Also see page 17)
You can adjust the subwoofer output level if you have selected “YES” for the
“SUBWOOFER” (see page 19).
1. Press any button of ON SCREEN CONTROL
% / fi / @ / # once.
The MAIN MENU appears on the TV.
2. Press ON SCREEN CONTROL
% / fi to move
to “SOUND CONTROL,”
then press @ / #.
The SOUND CONTROL menu appears on the TV.
3. Press ON SCREEN CONTROL
% / fi to move
to “SUBWFR LEVEL”
(Subwoofer Level).
4. Press ON SCREEN CONTROL
@ / # to adjust the subwoofer output level.
5. When you finish, press EXIT repeatedly until the menu disappears from the
TV.
Adjusting the DSP Modes (Also see pages 35, 38, 40, and 43)
1. Press any button of ON SCREEN CONTROL
% / fi / @ / # once.
The MAIN MENU appears on the TV.
2. Press ON SCREEN CONTROL
% / fi to move
to “MODE.”
3. Press ON SCREEN CONTROL @ / # to select the DSP mode you want to
adjust.
4. Press ON SCREEN CONTROL % / fi to move to “SOUND CONTROL,”
then press @ / #.
The SOUND CONTROL menu appears.
5. Press ON SCREEN CONTROL % / fi to move to “SURROUND LEVEL,”
then press @ / #.
The SURROUND LEVEL menu appears.
• If you select “HEADPHONE” in step 3, the SURROUND LEVEL menu will not
appear.
6. Press ON SCREEN CONTROL
% / fi to move
to the item you want to set
or adjust, then press ON SCREEN CONTROL @ / #.
On these adjustment menus, you can do the following:
For 3D-PHONIC modes:
“DSP EFFECT”: Adjust the effect level.
For DAP modes (LIVE CLUB, DANCE CLUB, HALL, PAVILION):
“REAR L LEVEL”: Adjust the left rear speaker output level. *
“REAR R LEVEL”: Adjust the right rear speaker output level. *
“DSP EFFECT”:
Select the effect level.
MAIN MENU
SOURCE :ch 1 FM 87.50MHz
VISUAL :VCR1
MODE :OFF
SOUND CONTROL
TUNER CONTROL
SETTING
VOLUME : 20
:OPERATE
**
**
**
**
**
**
EN47_62.RX-884R[E]/1.PM5 98.3.26, 1:02 PM 49