Roadside emergency 6-3 – Jaguar X-Type JJM 21 02 20/15 User Manual

Page 125

Advertising
background image

Roadside emergency 6-3

Emergency starting using
jump leads (continued)

The following procedure must be

followed exactly, being careful not to

cause sparks:
1. Apply the handbrake, select ‘P’

(automatic transmission vehicles

only), and turn off all the vehicle’s

electrical services.

2. Open the bonnet to gain access to the

battery.

3. Unclip the battery cover.

4. Attach one end of the red jump lead to

the positive (+) terminal of the

booster battery and the other end to

the positive (+) terminal of the

discharged battery. Make sure that a

good connection is made.

Caution:

Do not connect the negative

jump lead directly to the negative (–)
terminal of the discharged vehicle.
5. Attach one end of the black jump lead

to the negative (–) terminal of the

booster battery and the other end to

the engine mount, as shown. Make

sure that a good connection is made.

6. When started, allow the engine to idle

for five minutes before disconnecting

the cables.

7. Disconnect the black jump lead from

the engine mount point and the

booster battery negative (–) terminal.

8. Disconnect the red jump lead from the

positive (+) terminals of both

batteries.

9. Refit the battery box cover.

Advertising