JVC VR 601 User Manual
Page 32
32
4.3.4 Play Back Recorded Video from a HDD of the mobile rack
To play back a recorded video from a HD2, take the following steps:
(1) Press the Setup button
to enter the setup menu.
(2) Select DISK and press the Enter button
to enter the DISK SETTING page.
(3) Set the HD2 USAGE to REC and then exit the setup menu.
(4) Use the search function to access desired recorded video. For specific operation details
please refer to the next section 4.4 (Search Operations).
4.4 Search Operations
This section shows you how to access recorded video.
4.4.1 Full List Search
Take the following steps to proceed with the full-list search function.
(1) Press the Search button
to enter the search mode.
(2) Select the FULL LIST and press the Enter button
to access the complete list of recorded
video.
(3) Highlight the specific recorded video of your requirement and press the Enter button
to
display the selected video.
(Key Operation: Press the
“
^
” and
“v” buttons, to select a video; press the
“<”
and
“>” buttons, to flip over a page.)
NOTE: T: Timer recording; R: External trigger recording; A: Alarm recording.
NOTE: The maximum number of lists, for a respective HDD, is 3000.
* About the location of the buttons, please refer to Page 10 2.1 Front View.
SEARCH
FULL LIST
ALARM LIST
TIME SEARCH
THUMBNAIL
SD CARD
HD 1
1 11-11-02 12:20:23 10.1M
A 2 11-18-02 13:30:16 2.34M
3 12-02-03 14:20:25 2.05M
4 01-02-03 17:20:46 5.32M
R 5 02-14-03 16:11:55 24. 2M
T 6 02-17-03 13:30:22 36. 6M
7 02-20-03 18:33:54 6.41M
8 02-27-03 19:21:12 92. 3M