JVC VR 601 - Manual (Page 63)

63
Physical specification for Ethernet
Wire Type
Cat. 5
Connector Type RJ-45
Max. Cable Length 30 m
Hub Wiring Configuration Straight Through
PC Wiring Configuration Cross Over
NOTE: For more details on network connections, please refer to the following document.
10.1.2 Install the Network Viewer in your PC
Install the Network Viewer from the supported CD-R.
1. Exit all applications currently running in the selected PC.
2. Insert the supported CD-R in the CD-ROM drive. The program will execute the installation
automatically. Follow the on-screen instructions to proceed with the rest of the installation
procedure as they appear.
3. After the installation is complete, pop up the START menu from your computer, and point to
Programs / JVC Picture Viewer to open up the program selection page as shown below.
Click the Network Viewer tag to start the Network Viewer program.
NOTE: If the Network Viewer needs to be upgraded, please contact your JVC dealer.
NOTE: Please make sure the TCP/IP communication software has been properly set and
configured in your computer. To check your TCP/IP settings, refer to the following
document.