JVC VR 601 - Manual (Page 46)

46
5.4 COMMUNICATION
This option allows you to configure the status of the RS-232 communication port when connected to an
external device, and the Ethernet communications settings. (Please refer to the RS-232 Protocol and
Network Function for more details)
COMM ID:
Communication ID for RS-232 and RS-485 communication. After the VR-601 receives a RS-232 or
RS-485 command, it checks if the <Dest ID> within the code is the same as the COMM ID, in which case
the particular command can be accept.
RS-232:
The RS-232 communication port can be either in an importing or exporting mode according to your
applications.
ON: Enables the RS-232 communication port. When you wish the unit to be controlled by an
external device, please select this entry for use.
OFF: Disables the RS-232 communication port.
RS-485:
The RS-485 communication port can be either in an importing or exporting mode according to your
applications.
ON: Enables the RS-485 communication port. When you wish the unit to be controlled by an
external device, please select this entry for use.
OFF: Disables the RS-485 communication port.
NET ENABLE:
This option selects either enable or disable for the Ethernet communication port.
OFF: Disables it.
ON: Enables it.
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
COMM SETTING
COMM ID
: 01
RS232 : ON
RS485 : ON
NET ENABLE : OFF
NET DHCP : OFF
NET IP : SET
FTP SETTING
MAIN PAGE
SET RS232 / RS485 ID