Rj-45 pin configuration for lan hub, 2 configure your dvr network settings, 1 enable dvr network function – JVC VR 601 User Manual
Page 73
73
RJ-45 PIN configuration for LAN Hub
PIN NO.
PIN Assignment
1.
TX +
2.
TX -
3.
RX +
4.
Not Connected
5.
Not Connected
6.
RX -
7.
Not Connected
8.
Not Connected
1 2 3 4 5 6 7 8
RJ-45 socket
12.1.3 Connect to WAN (INTERNET)
The RJ-45 PIN configuration for connecting to a WAN is the same as connecting to a LAN.
RJ-45
SD Card
RS-232
ALARM
DC12V
AUDIO
IN
IN
OUT
OUT
VIDEO
TO
MONITOR
TO
MUX'S VCR IN
FROM MUX
MAIN MONITOR
I/O
RS-485
ETHERNET
10/100
12.2 Configure Your DVR Network Settings
Upon network hardware connection, you need to activate the network function and configure
the proper network settings of the DVR.
12.2.1 Enable DVR Network Function
Press the Setup button
to enter the MAIN MENU. Please use the“<” “>” buttons
and
to highlight COMMUNICATION; then press the Enter button
to enter
the COMM SETTING page.
Use the “
^
” “v” buttons
and
to highlight NET ENABLE; select ON. Then
press the Enter button
to proceed.
* About the location of the buttons, please refer to Page 10 2.1 Front View.
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
COMM SETTING
COMM ID
: 01
RS232
: ON
RS485
: ON
NET ENABLE
: ON
NET DHCP
: OFF
NET
IP
:
SET
FTP SETTING
MAIN PAGE
ETHERNET ENABLE