JVC HM-HDS1EU - Manual (Page 22)

Filename [HDS1EU_2.fm]
Masterpage:Left
22
EN
Page 22 June 21, 2001 5:35 pm
RECORDING/PLAYBACK ON HDD DECK
Basic Recording
A
Turn on the recorder.
Press 1 .
● The button corresponding to the previously selected deck
lights on the recorder.
B
Select the HDD deck.
Press HDD.
● The HDD button lights on the recorder.
C
Choose a programme.
Press PR +/– or the number keys to select the channel
you wish to record.
● When you switch channels on the HDD deck, the picture
appears a few seconds behind. It is not a malfunction.
D
Set the recording speed.
Press MODE ( p ).
● For details on the recording speed, see page 23.
E
Start recording.
Press and hold 7 and press 4 on the remote control, or
press 7 on the recorder.
● The HDD recording indicator lights on the recorder.
F
Stop recording.
Press 8 .
● The HDD recording indicator turns off.
● There may be a few seconds’ delay in resuming normal screen.
It is not a malfunction.
NOTES:
● It is not possible to record a TV programme on both the HDD
deck and the VHS deck simultaneously. In addition, it is not
possible to record simultaneously from the same external
input.
● It is not possible to pause recording on the HDD deck while
recording from the channels other than “L-1”, “F-1”, “DUB”.
(
੬
pg. 59, 63)
● While recording a programme, you can play back the
previously recorded part by “Live Memory Playback”
(
੬
pg. 26).
● Turn on the TV and select the AV mode.
● If the recorder is turned on with HDD deck selected,
there may be about 30 seconds’ delay in starting to
show pictures on the screen.
HDS1EU_2.fm Page 22 Thursday, June 21, 2001 5:35 PM