Output/input set, L-1 output and l-1 input setting, Editing (cont.) – JVC HM-HDS1EU User Manual

Page 64: Access the main menu screen, Access the input/output set screen, Return to the normal screen

Advertising
background image

Filename [HDS1EU_4.fm]

Masterpage:Left

64

EN

Page 64

June 21, 2001 12:29 pm

EDITING (cont.)

Output/Input Set

L-1 OUTPUT and L-1 INPUT Setting

The AV1 (L-1) IN/OUT connector accepts and delivers either a
composite signal (regular video signal) or a Y/C signal (a signal
in which the luminance and chrominance signals are separated).
Set “L-1 OUTPUT” and “L-1 INPUT” to the appropriate mode
depending on the type of appliance connected to the recorder’s
AV1 (L-1) IN/OUT connector.

A

Access the Main Menu screen.

Press MENU.

B

Access the Input/Output Set screen.

A Press

w

e

to move the arrow to “FUNCTION SET UP”,

then press

t

or OK.

B Press

w

e

to move the arrow to “INPUT/OUTPUT”,

then press OK.

C

Select the output or input mode for the AV1
(L-1) IN/OUT connector.

D

Return to the normal screen.

Press MENU.

NOTES:

If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set

“L-1 INPUT” to “S-VIDEO”.

If “L-2 SELECT” is set to “DECODER”, it is impossible to set

“L-1 INPUT” to “S-VIDEO”.

A Press

rt

to move the

arrow to “L-1 OUTPUT”
or “L-1 INPUT”, then
press OK.

B Press

rt

to select the

appropriate setting, then
press OK.

* The default setting is bold in

the table below.

8

L-1 OUTPUT

VIDEO:

If a connected appliance’s input is
compatible only with regular video
signals, set to “VIDEO”.

S-VIDEO:

If a connected appliance’s input is
compatible with Y/C signals, set to
“S-VIDEO”. You can obtain
high-quality S-VHS picture. (For
connection, be sure to use a 21-pin
SCART cable that is compatible with
the Y/C signal.)

8

L-1 INPUT

VIDEO:

If a connected appliance’s output is
compatible only with regular video
signals, set to “VIDEO”.

S-VIDEO:

If a connected appliance’s output is
compatible with Y/C signals, set to
“S-VIDEO”. You can obtain
high-quality S-VHS picture. (For
connection, be sure to use a 21-pin
SCART cable that is compatible with
the Y/C signal.)

HDD/VCR SET UP

INITIAL SET UP

FUNCTION SET UP

L-1 OUTPUT

VIDEO

L-1 INPUT

VIDEO

L-2 SELECT

A/V

F-1 INPUT

VIDEO

INPUT/OUTPUT

FUNCTION

SELECT OK EXIT

THEN PRESS [OK]

INDEX

MENU

SELECT WITH

VIDEO

S-VIDEO

HDS1EU_.book Page 64 Thursday, June 21, 2001 12:30 PM

Advertising