JVC HM-HDS1EU - Manual (Page 43)

Masterpage:Right-NoTitle0
EN
43
Filename [HDS1EU_3.fm]
Page 43 June 21, 2001 12:29 pm
G
Set the recording speed.
Press MODE (
p
).
● For the VHS deck:
It is not possible to select EP mode if “COLOUR SYSTEM” is
set to “MESECAM”.
(
੬
pg. 76 )
H
Set the VPS/PDC mode.
Press VPS/PDC to select “ON” or “OFF”.
● If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is
set to ON.
● If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is
set to OFF.
੬
“VPS/PDC Recording” on page 45.
I
Set the category.
J
Return to the normal screen.
Press
w r e t
to move the arrow to “CONFIRM”, then
press OK. “PROGRAMME COMPLETED” appears on the
TV screen for about 5 seconds, then the normal screen
appears.
● If “PROGRAMME OVERLAPPED” appears on the TV screen,
see page 46.
K
Engage the recorder’s timer mode.
Press
#
(TIMER). The recorder turns off automatically and
“
#
” appears on the front display panel.
● To disengage the timer mode, press
# (TIMER) again.
NOTES:
● To Change The Stop Time . . .
. . . press STOP +/– in step F. You can compensate for
anticipated programme schedule delays.
● To Timer-Record Weekly Or Daily Serials . . .
. . . in step F, press WEEKLY (number key “9”) for weekly
serials or DAILY (number key “8”) for daily serials (Monday —
Friday). Either “WEEKLY” or “DAILY” appears on the TV
screen. Pressing the button again makes the corresponding
indication disappear.
● During timer recording . . .
. . .it is not possible to disengage the timer mode.
. . .it is not possible to change the recording deck (HDD or
VHS).
● It is not possible to timer-record a TV programme with a
S HOW V IEW number which starts with “0”.
A Press
w e
to move the
arrow to “CATEGORY“,
then press OK. The
category set screen
appears.
B Press
w r e t
to select
the desired category, then
press OK.
C Confirm the arrow is on
“RETURN”, then press
OK. The programme
screen resumes.
PROGRAMME
SPECIAL
RELIGIOUS
MOVIES
CHILDREN
SPORTS
SERIES
MUSIC
CLASSICS
OTHERS
SHOPPING
UNDECIDED
COMEDY DRAMA
SHOW
NEWS EDUCATIONS
RETURN
SELECT OK
SELECT WITH
THEN PRESS [OK]
INDEX
Satellite Receiver Users
To timer-record a satellite broadcast using the S HOW V IEW
system:
A Perform “Automatic Satellite Programme Recording” on
page 47.
B Perform steps A – K. In step F, the front display panel
shows “L2” for the channel position. In step H, you
cannot set “VPS/PDC” to “ON”.
C Leave the satellite receiver’s power on.
HDS1EU_.book Page 43 Thursday, June 21, 2001 12:30 PM