JVC HR-DD949EE - Manual (Page 20)

20
EN
B.E.S.T. Picture
System
Turn on the TV and select the VIDEO channel (or AV mode).
5 / 8
¡ 1
8
q
6
RECORDING (cont.)
The B.E.S.T. (Biconditional Equalised Signal Tracking) system
checks the condition of the tape in use during recording and
playback, and compensates to provide the highest-possible
recording and playback pictures. The default setting for both
recording and playback is “ON”.
Recording
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
● The recorder power comes on automatically.
ACCESS MAIN MENU
SCREEN
2
Press MENU twice.
ACCESS MODE SET
SCREEN
3
Move the highlight bar
(pointer) to "MODE SET"
by pressing PUSH JOG
%fi, then press OK.
CONFIRM B.E.S.T. STATUS
4
The default setting is
“ON”. If this is the case,
go to step 5. If not, press
PUSH JOG
fi to move the
highlight bar (pointer) to
“B.E.S.T.”, then press
PUSH JOG to set to
“ON”.
RETURN TO NORMAL
SCREEN
5
Press MENU.
START RECORDING
6
Press and hold RECORD and press PLAY on the remote,
or press RECORD on the recorder.
● The recorder spends approximately 7 seconds
assessing the condition of the tape, then begins
recording.
● When the "BEST" indicator begins blinking, that
means adjustment is complete.
● Pressing the recorder's RECORD button while "BEST"
is displayed does not start Instant Timer Recording
(
੬
pg. 19).
As the tape check progresses, the “– –” marks on the display
panel increase upward. Once the "BEST" indicator starts
blinking, the check is complete.
1 2
4 5
3
6
8
0
7 9
2
4
1
3
PLAY
Display Panel Indication
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
GUIDE PROG SET
CLOCK SET
LANGUAGE SET
JLIP ID NO. SET
[ 5∞] =
[MENU] : EXIT
5
MODE SET
AUTO TIMER : OFF
O. S. D.
: ON
B. E. S. T. : ON
TIME SCAN : ON
AUDIO
[ 5∞] = [ ] : ON/OFF
[MENU] : EXIT
%
RECORD
RECORD
PUSH JOG
MENU
OK