JVC HR-DD949EE - Manual (Page 28)

28
EN
Auto Timer
When the Auto Timer is set to "ON" the timer is automatically
engaged when the recorder power is turned off and automati-
cally disengaged when the recorder is powered back on.
ACCESS MAIN MENU
SCREEN
1
Press MENU twice.
ACCESS MODE SET
SCREEN
2
Press PUSH JOG %fi to
move the highlight bar
(pointer) to "MODE SET",
then press OK.
SELECT MODE
3
Press PUSH JOG to
select either "ON" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
For safety, when Auto timer is set to "OFF", all other recorder
functions are disabled while the Timer mode is engaged. To
disengage the timer, press TIMER.
TIMER RECORDING (cont.)
Check And Cancel
Programmes
ACCESS PROGRAMME
DISPLAY AND/OR SCREEN
1
Press PROG CHECK.
● The display panel shows the programme start time.
Pressing OK changes the display to the programme
stop time, then the date and channel position.
● If the recorder is turned on and the TV is set to its
VIDEO channel or AV mode, you can check program
information on screen.
● Each time you press PROG CHECK, the next
programme's information appears.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press CANCEL.
All information you input is deleted.
REVISE PROGRAMME
INFORMATION
2
Input the appropriate data using the START +/–, STOP
+/–, DATE +/– and TV PROG +/– buttons on the
remote control.
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
GUIDE PROG SET
CLOCK SET
LANGUAGE SET
JLIP ID NO. SET
[ 5∞] =
[MENU] : EXIT
5
MODE SET
AUTO TIMER : OFF
O. S. D. : ON
B. E. S. T. : ON
TIME SCAN : ON
AUDIO
[ 5∞] = [ ] : ON/OFF
[MENU] : EXIT
1 2
4 5
3
6
8
0
7 9
2
4
1
3
TIMER
TV PROG+/–
DATE+/–
STOP+/–
START+/–
PUSH JOG
MENU
PROG CHECK
OK
CANCEL
%