Jaguar SEMCON JLR XJ - Manual (Page 22)

L
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 NAS
LANGUAGE: english-NAS-en; MARQUE: jaguar; MODEL: XJ
Head restraints
22
1. To raise, pull the restraint upwards, it will
click and lock in position.
2. To lower, depress the locking button and
push down on the restraint.
3. To adjust the angle of the head restraint,
press the locking button on the side of the
restraint and tilt to the desired position.
4. To adjust the center head restraint, tilt the
restraint forward.
5. Raise or lower the restraint as required.
The head restraint can be locked in one of
three height positions.
Note: Do not use the locking collars to
raise or lower the center head restraint.
The locking collars are only used to remove
the center head restraint.
1. Pull the wing heads forward in to the first
or second position.
2. To raise, pull the restraint upwards, it will
click and lock in only one position.
Note: Do not try to raise the head restraint
further than the one adjustment position.
3. To lower, depress both the locking buttons
at the same time.
REAR HEAD RESTRAINT REMOVAL
Always store a removed head restraint
securely. In the event of an accident, an
unsecured object can cause serious injury or
death.
It is possible to remove the center rear head
restraint, if necessary, to enable the fitment of
a child restraint:
1. Raise the head restraint to its uppermost
position.
2. Press both locking collars.
3. Lift the head restraint out of the seat.
Ensure the head restraint is refitted once the
child seat is removed.
Note: It is not possible to remove the left or
right rear head restraints.