Jaguar SEMCON JLR XJ - Manual (Page 62)

L
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 NAS
LANGUAGE: english-NAS-en; MARQUE: jaguar; MODEL: XJ
Message center
62
Message center WARNING AND INFORMATION
MESSAGES
Do not ignore warning messages. Take
appropriate action and, when necessary,
seek qualified assistance before driving the
vehicle. Failure to do so could result in
failure of vehicle systems potentially causing
loss of control and an accident.
If more than one message is active, each is
displayed in turn for 2 seconds in order of
priority.
Note: The message center messages and their
meanings are detailed, where necessary, within
the appropriate subject sections.
TRIP COMPUTER
The computer memory stores data for a
journey or series of journeys until it is reset to
zero.
The displayed information is for guidance only,
as it can be affected by traffic, road and
weather conditions.
Three independent memories are available, A,
B and Auto. A and B memories can be set
independently, while the Auto trip will reset
after every ignition cycle as the vehicle moves.
Trip computer information is displayed on the
instrument panel.
USING THE TRIP COMPUTER
Press the TRIP button on the end of the left
column stalk repeatedly to display the trip data
in the following order:
• Odometer.
• Trip distance.
• Average speed.
• Average fuel consumption.
• Instantaneous fuel economy.
• Range.
• Blank.
To reset the displayed trip data, press and hold
the TRIP button.
TRIP DISTANCE
Distance travelled since the last memory reset.
The maximum trip reading is 9 999.9
(kilometers or miles). The computer will
automatically reset to zero if this distance is
exceeded.
RANGE
This shows the predicted distance, miles or
kilometers, that the vehicle should travel on the
remaining fuel, assuming average fuel
economy and fuel consumption stay constant.
IMPERIAL/METRIC/MIXED DISPLAY
The display of imperial, mixed or metric units is
selected via the instrument panel menu.