Tire pressure monitoring system – Jaguar SEMCON JLR XJ User Manual

Page 91

Advertising
background image

R

(FM8)

SEMCON JLR OWNER GUIDE VER 1.00

NAS

LANGUAGE: english-NAS-en;

MARQUE: jaguar;

MODEL: XJ

Tire pressure monitoring system

91

Valve stem seal, washer, nut, valve core and
cap should be replaced at every tire change.
Valve stem seal, washer and nut must be
replaced if valve retention nut is loosened.
Sensor units and nuts must be refitted using
correct torque figures and associated profile.
Damage to the vehicle may result if these
precautions are not taken.

Sensors can be removed from the wheel by the
unscrewing of the valve retention nut.

REPLACEMENT SENSOR

Should the sensor require replacing, it should
be carried out by a Dealer/Authorized Repairer.

A replacement sensor must be fitted to a
running wheel in order to be recognized by the
system. The vehicle needs to be stationary for
15 minutes during the sensor fitment before
the system is ready to detect the new sensor.
The vehicle must be driven for a minimum of
fifteen minutes after the sensor change, and
then remain stationary for fifteen minutes to
activate full TPMS operation.

If the TPMS warning for any wheel does not
clear, even after ensuring correct inflation and
driving for more than ten minutes above 18
mph (25 km/h), you should seek qualified
assistance as soon as possible.

TYPE APPROVAL NUMBERS

USA

The TPMS devices comply with part 15 of the
FCC Rules and RSS-210. Operation is subject
to the following two conditions:

1. This device may not cause harmful

interference, and

2. this device must accept any interference

received, including interference that may
cause undesired operation.

Canada

IC - RSS-210:

Operation is subject to the following two
conditions:

1. This device may not cause interference,

and

2. this device must accept any interference,

including interference that may cause
undesired operation of the device.

Note: Changes or modifications not expressly
approved by the manufacturer could void the
user’s authority to use the equipment.

The TPMS radio frequency approval numbers
for the USA and Canada are shown below:

USA FCC ID:

KR5S120123

KR5S180052021

5WK49097

Canada IC:

267T-S120123

7812D-S180020A

267T-5WK49097

Advertising