JVC 50051243 - Manual (Page 10)

ENGLISH - 9 -
(QJODQG
,WDOLD
1RUZD\
1HGHUODQG
3RUWXJDO
&28175<
• Press “ ” or “ ” button to select the country where
you are now located.
• After selecting the country, press “ ” or “ ” button to store
the selected country.
• Press MENU button to return to the INSTALL menu, or
Press STANDARD button to exit the menu.
Tuning Menu:
You can store a channel manually, or modify the current set-
tings of a channel (for example, changing the channel name).
In an AV mode, you can change only the “MODE” or “CO-
LOUR SYSTEM” setting.
• If you want to modify the current settings of a channel, se-
lect the channel of which you want to modify the setting.
Then display the main menu on the screen.
• Press “ “ or “ ” button to select “TUNING” item.
• Press “ ” or “ ” button to enter “TUNING” menu.
Q ‚t h€€r
Trh pu
T‡hqh q
8‚y‚ˆ ƒ†‡r€
7hq
UVIDIBÃÃÃÃÃÃ!!ÃÃÃ8!
1. Press “ “ or “ ” to select an item in the “TUNING”
menu. Then press “ ” or “ ” button to change the setting.
2. After all settings of a channel are completed, press “ “
or “ ” button to select “Programme” item. Then press
“ ” or “ ” button to select a programme number which you
want to store the setting.
3. Press “ “ or “ ” button to select “Store” item. Then
press “ ” or “ ” button to store the setting.
The "STORED" appears at the bottom of the menu for 3
seconds. Then T-V LINK menu appears.
9‚y‚hqÃÃUWà ÃÃW8SÃArh‡ˆ r
8
Ã
‚‡vˆr Ã
TU9 8hpry
UWÃGvx
4. If you do not have a T-V LINK compatible VCR, press
“ STANDARD ” button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT-2 terminal, follow the operating procedure “Down-
loading the data to VCR” on page 6 to transmit the Pro-
gramme table data to the VCR.
Search:
You can search a channel manually.
• Select "Search" item. Then press “ ” or “ ” button to start
searching. "SEARCHING" is displayed while the TV is
searching a channel.
• Searching stops when the TV finds a channel. Then the
channel is displayed.
• Press “ ” or “ ” button repeatedly until the channel you want
appears.
• When you cannot search a channel you want, select the
"Standard" item and select other broadcasting system.
Then start searching again.
Standard:
• If you cannot hear the normal sound even when the picture
appears normally, select the correct broadcasting system to
hear the sound normally.
• Select "Standard" item. Then press “ ” or “ ” button to se-
lect a broadcasting system.
Colour system:
• If the picture is not clear or no colour appears, select the
correct colour system to display the picture normally.
• Select "Colour system" item. Then press “ ” or “ ” button
to select a colour system.
Band, Channel:
• If you know a channel number, you can find it directly by
entering the channel number.
• Select the "Band" item. Then press “ ” or “ ” button to se-
lect the band (C or S) where the channel you want is lo-
cated.
• Select the “Channel” item. Then press “ ” or “ ” button to
select the channel number, or enter the channel number
with the digit buttons. The available channel numbers differ
depending on your “COUNTRY” and “Standard” settings.
Fine tuning:
If the channel reception is poor, fine-tune the channel.
01-ENG-2834-AK52-1100UK-4-3-(AV-28RH4BU&SU).p65 27.04.2004, 10:47 9