JVC 50051243 - Manual (Page 11)

ENGLISH - 10 -
• Select "Fine tuning" item. Then press “ ” or “ ” button to
fine -tune the channel.
Name:
You can store the channel name or change it.
• Select “Name” item. Then press “ ” or “ ” button to display
a cursor.
• Press “ ” or “ ” button to select a character and
press “ ” or “ ” button to move the cursor.
• After the name is completed, press the MENU button.
Mode:
Set "Mode" item to "TV" for the TV channels.
• When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the "Mode" set-
ting from "TV" to "VCR".
Decoder (EXT-2):
You can only set “Decoder (EXT-2)” item to “ON” if you have
a decoder connected to a T-V LINK compatible VCR, which
in turn is connected to the EXT-2 terminal. To use this item,
please see the
“Using the Decoder (EXT-2) function” on the following sec-
tion.
Store:
After the all settings are completed, store the new channel’s
setting to the programme number which you selected.
• Press “
“ or “ ” button to select “Store”, then press
“ ” or “ ” to store it.
Using the Decoder (EXT-2) function
If you have a decoder connected to a T-V LINK compatible
VCR, which in turn is connected to the EXT-2 terminal, use
DECODER (EXT-2) to unscramble the scrambled TV chan-
nels.
1. Exit the menu.
2. Turn on the decoder power.
3. Display the scrambled TV channel on the TV. Even if the
decoder is working, a scrambled picture appears.
4. Display the “INSTALL.” menu again.
5. Press “
” or “ ” button to select DECODER (EXT-2),
then press “ ” or “ ” button to set to “ON”
6. Press “ ” or “ ” to select STORE, then press “ ” or
“ ” button to store it. “T-V LINK” menu will appear after the
TV stores the setting.
9‚y‚hqÃÃUWà ÃÃW8S
8
Ã
‚‡vˆr Ã
TU9 8hpry
UWÃGvx
7. Follow the operating procedure “Downloading the data
to VCR” on page 6 to transmit the revised programme
table data to the VCR.
• If you do not want to transmit, press “ STANDARD ” but-
ton to exit the menu.
Note:
You can only use this item if you have a decoder connected
to a T-V LINK compatible VCR to EXT-2 terminal. Setting this
item to “ON” by mistake causes the picture/sound of a TV
channel you are currently viewing to disappear.
If this item has been set to “ON” but the TV channel cannot
be unscrambled, check the following:
• Has the decoder been connected to the VCR properly ac-
cording to the VCR and Decoder instruction manuals?
• Can the TV channel be unscrambled with a decoder?
• Do you need to change the VCR settings in order to con-
nect the decoder? Confirm that the VCR is set properly by
rechecking the VCR instruction manual.
Program Menu:
You can use the PROGRAM menu to change a programme
number, delete a channel.
• Press “
“ or “ ” button to select “PROGRAM” item.
• Press “ ” or “ ” button to enter the PROGRAM menu.
puhtr
qryr‡r
UWÃGvx
 ГГГГ
! ГГГГ
" ГГГГ
# ГГГГ
$ ГГГГ
% ГГГГ
& ГГГГ
' ГГГГ
( ГГГГ
  ГГГГ
 ГГГГ
 ! ГГГГ
 " ГГГГ
 # ГГГГ
 $ ГГГГ
 % ГГГГ
 & ГГГГ
 ' ГГГГ
 ( ГГГГ
! ГГГГ
! ГГГГ
!! ГГГГ
!" ГГГГ
!# ГГГГ
!$ ГГГГ
!% ГГГГ
!& ГГГГ
!' ГГГГ
!( ГГГГ
" ГГГГ
QSPBS6H
v
To choose a channel in the PROGRAM menu:
Press “
“ / “ ”/ “ ” / “ ” button.
The colour of the programme number that you choose is
changed in the PROGRAM menu and you can view the pic-
ture of that channel.
Caution:
Using “DELETE” or “CHANGE” item rewrite the current chan-
nel list in the PROGRAM menu. Therefore, the programme
numbers of some of channels will change.
When you complete the settings of PROGRAM menu:
If you have a T-V LINK compatible VCR, press the “ ” but-
ton to display the T-V LINK menu. Then follow the operating
procedure “Downloading the data to VCR” on page 6 to
transmit the Programme table data to the VCR.
01-ENG-2834-AK52-1100UK-4-3-(AV-28RH4BU&SU).p65 27.04.2004, 10:47 10