Feature menu – JVC 50051243 User Manual
Page 12
ENGLISH - 11 -
9yhqÃÃUWÃ
ÃÃW8S
8
Ã
vr
Ã
TU9
8hpry
UWÃGvx
If you do not have a T-V LINK compatible VCR, press
STAN-
DARD
button to exit the menu.
To change a programme number (CHANGE):
1. Select a channel that you want to change its programme
number.
2. Press Blue button to enter the CHANGE mode.
3. Press
/
/ / button to select the pro-
gramme number that you want to change the programme
number of the selected channel to.
4. Press Blue button. Two channels of the selected program-
me numbers will be exchanged.
To delete a channel (DELETE):
1. Select a channel that you want to delete.
2. Press Red button to delete it.
Autostore Menu:
The AUTOSTORE function automatically programmes the re-
ceived channels in your TV's programme numbers.
Before use this function, please confirm that the LAN-
GUAGE and COUNTRY setting are correct.
1. Press
or
button to select AUTOSTORE
item.
2. Press or button to enter the AUTOSTORE menu.
6yyà r rqà t hrÃ
vyyÃirÃr hrqÄ
8vr
Ã
TU9 8hpry
X6SIDIBÃÄ
A warning message All prestored programmes will be
erased! appears in a message box.
3. Press button to start the AUTOSTORE function.
To cancel the AUTOSTORE function, press the
STAN-
DARD
button.
6QTÃDTÃSVIIDIBÃQG@6T@
X6DU
ÃÃÃÃÃÃÃÃThvÃÃÃ8uhryÃÃÃIhr
IS
6VUPTUPS@
6QTÃDTÃSVIIDIBÃQG@6T@
X6DU
ÃÃÃÃÃÃÃÃThvÃÃÃ8uhryÃÃÃIhr
IS (
8%#
8%#
6VUPTUPS@
4. After the AUTOSTORE is finalized, the PROGRAM menu
appears.
Please see Program Menu on above section.
Feature Menu
Press MENU button, now you are in main menu. In the
main menu, select FEATURE, using
or
button.
Then enter the feature menu pressing or button.
Sleep timer:
The sleep timer is used to turn the TV off after a defined peri-
od. Press or button to choose a priod of time after se-
lecting this item. The timer can be programmed between Off
and 120 minutes in steps of 10 minutes. One minute before
the "Sleep timer" function turns the TV off, the remaining
time will be displayed.
Child lock:
You can disable the control panel buttons (except the POW-
ER button) with this item.
Press or button to change the setting to ON or OFF
after selecting this item.
When you set this item to ON, the TV can be operated only
by using the remote control handset.
Warning: If Child Lock item is set to ON, the TV can not be
operated by VCR.
Setting External Source Output:
You can use this menu to select the internal or external
source that will be output at EXT.2 (EXT-2) terminal.
In the FEATURE menu select EXT-2 Output using
or
button. Then select the source you want to be out-
put at EXT-2 pressing or button (one of the sources:
TV, EXT-1 or EXT-3 (Front AV).
01-ENG-2834-AK52-1100UK-4-3-(AV-28RH4BU&SU).p65
27.04.2004, 10:47
11