JVC 50051243 - Manual (Page 6)

ENGLISH - 5 -
NOTE: If you have switched of the TV set from the power but-
ton instead of the remote control, next time you press the
power button, the TV set will switch on without going to the
stand-by mode.
Initial Settings
When the TV is first turned on. It enters the initial setting
mode, and the AUTOSTORE menu is displayed. Follow the
instructions below to do the initial settings.
G6IBV6B@ГГ
8PVIUS`ГГ
8‚‡vˆr
• The AUTOSTORE menu does not appear when your TV has
been turned on once. In this case, use the “LANGUAGE”,
“COUNTRY” and “AUTOSTORE” items in the INSTALL
menu to make the initial settings. For details, see “Install
(Installation) Menu” on page 8.
• If you want to do the initial settings later, press “ STAN-
DARD ” button to turn the menu off.
1. Press " " or " " button to select "LANGUAGE"
item. Then press the “ ” or “ ” button to enter the "LAN-
GUAGE" sub-menu.
(QJOLVK
'HXWVFK
)UDQoDLV
(VSDxRO
3RUWXJXHV
/$1*8$*(
2. Press " " or " " button to select a language. Then
press the “ ” or “ ” button to store it.
3. Press the MENU button to return to the AUTOSTORE
menu.
4. Press " " or " " button to select "COUNTRY" item.
Then press the “ ” or “ ” button to enter the "COUNTRY"
sub-menu.
(QJODQG
,WDOLD
1RUZD\
1HGHUODQG
3RUWXJDO
&28175<
5. Press " " or " " button to select the country where
you are now located. Then press the “ ” or “ ” button to
store it.
6. Press the MENU button to return to the AUTOSTORE
menu.
7. Press “ ” or “ ” button to select “Continue” item.
Then press “ ” button to start the AUTOSTORE function.
The AUTOSTORE function automatically stores the re-
ceived channels in your TV's programme numbers.
6QTÃDTÃSVIIDIBÃQG@6T@
X6DU
ÃÃÃÃÃÃÃÃT‡h‡v‚ÃÃÃ8uhryÃÃÃIh€r
IS
6QTÃDTÃSVIIDIBÃQG@6T@
X6DU
ÃÃÃÃÃÃÃÃT‡h‡v‚ÃÃÃ8uhryÃÃÃIh€r
IS
APS: Automatic Programming System
After the AUTOSTORE is finalized, “PROGRAM” menu ap-
pears. You can delete a channel or change a programme
number. For details, see “PROGRAM Menu” on page 10.
puhtr
qryr‡r
UWÃGvx
 ГГГГ
! ГГГГ
" ГГГГ
# ГГГГ
$ ГГГГ
% ГГГГ
& ГГГГ
' ГГГГ
( ГГГГ
  ГГГГ
 ГГГГ
 ! ГГГГ
 " ГГГГ
 # ГГГГ
 $ ГГГГ
 % ГГГГ
 & ГГГГ
 ' ГГГГ
 ( ГГГГ
! ГГГГ
! ГГГГ
!! ГГГГ
!" ГГГГ
!# ГГГГ
!$ ГГГГ
!% ГГГГ
!& ГГГГ
!' ГГГГ
!( ГГГГ
" ГГГГ
QSPBS6H
v
8. If you do not have a T-V LINK compatible VCR, press
“ STANDARD ” button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT-2 terminal, press “
” button to display “T-V LINK”
menu. Then follow the operating procedure “Downloading
data to VCR” in the following “T-V LINK” section.
9‚y‚hqÃÃUWà ÃÃW8S
8
Ã
‚‡vˆr Ã
TU9 8hpry
UWÃGvx
If a channel you want to view is not stored, store it using
the TUNING menu. For details, see “Tuning Menu” on
page 9.
T-V LINK
When a T-V LINK compatible VCR is connected to the EXT-2
Terminal on the TV, it is easier to set up the VCR and to view
videos. T-V LINK uses the following features:
To use T-V LINK functions:
A “T-V LINK compatible VCR” means a JVC video cassette
recorder with the T-V LINK logo, or with one of the following
logos. However, these VCRs may support some or all of the
features described earlier. For details, see your VCR instruc-
tion manual.
“Q-LINK” (a trademark of Panasonic Corporation)
“Data Logic” (a trademark of Metz Corporation)
01-ENG-2834-AK52-1100UK-4-3-(AV-28RH4BU&SU).p65 27.04.2004, 10:46 5