JVC GET0056-001A - Manual (Page 10)

10
ENGLISH
Adjusting the sound
You can adjust the treble/bass sounds and the
speaker balance.
1
Select the item you want to adjust.
Indication To do: Range
BAS Adjust the bass – 06 (min.)
(bass) |
+06 (max.)
TRE Adjust the treble –06 (min.)
(treble) |
+06 (max.)
FAD* Adjust the front R06 (rear only)
(Fader)* and rear speaker |
balance F06 (front only)
BAL Adjust the left L06 (left only)
(Balance) and right speaker |
balance R06 (right only)
VOL Adjust the volume 00 (min.)
(Volume) |
50 (max.)
Note:
* If you are using a two-speaker system, set the fader
level to “00”.
2
Adjust the level.
Note:
Normally the control dial work as the volume control
buttons. So you do not have to select “VOL” to adjust
the volume level.
SOUND ADJUSTMENTS
Turning on/off the loudness
function
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these frequencies
to produce a well-balanced sound at low volume
level.
Each time you press LOUD, the loudness function
turns on/off alternatively.
EN10-12KS-FX611[U]-9 11/1/01, 3:17 PM 10