JVC GET0056-001A - Manual (Page 21)

21
ENGLISH
Selecting the external
component to use
You can connect the external component to the CD
changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
To use the external component as the playback
source through this receiver, you need to select
which device — CD changer or external component
— to use. When shipped from the factory, CD
changer is selected as the external component.
LINE IN: To use the external component other than
CD changer
CHANGER: To use the CD changer
1
Change the source to FM, AM or TAPE.
2
Press and hold SEL for more than 2
seconds.
“CLOCK H”, “CLOCK M”,
“SCM LINK”, “LEVEL”,
“B.SKIP” or “EXT IN”
appears on the display.
3
Select “LINE IN” if not shown on the
display.
4
Select the desired mode — “LINE IN”
or “CHANGER”.
5
Finish the setting
Note:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
connection Manual (separate volume).
EN20-24KS-FX611[U]-9 11/1/01, 3:19 PM 21