JVC GET0056-001A - Manual (Page 20)

20
ENGLISH
EXTERNAL COMPONENT OPERATIONS
You can connect the external component to the CD
changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input correctly.
(See “Selecting the external component to use” on page
21.)
1
Select the external component.
Note on One-Touch Operation:
When you press CD-CH, the power automatically
comes on. You do not have to press
to
turn on the power.
• If “LINE IN” does not appear on the display, see
page 21 and select the external input (“EXT IN”).
Scan
Music
Multi
MO
DISP DISP
SCAN SCAN
LOUD LOUD
8 9 10 11 12 7
CD CHANGER CONTROL CD CHANGER CONTROL
Scan
Music
Multi
MO
DISP DISP
SCAN SCAN
LOUD LOUD
8 9 10 11 12 7
CD CHANGER CONTROL CD CHANGER CONTROL
2
Turn on the connected device and
start playing the source.
3
Adjust the volume.
To turn up the
volume
To turn down the
volume
EN20-24KS-FX611[U]-9 11/1/01, 3:19 PM 20