JVC KD-LX50 - Manual (Page 22)

22
ENGLISH
STOP
PLAY
VOICE COMMAND OPERATIONS
What is Voice Recognition System?
The Voice Recognition System enables the voice command operations — “Speak a word. It
will be done.”
This System allows you to operate the receiver by your spoken words with ease and safety. It
has ended the risk of searching for push-buttons while you are on the road.
JVC Voice Recognition System provides you two modes; Standard Word mode and User
Word mode.
In the Standard Word mode, this System allows you to use only 13 Operation Commands,
preset by the factory, and covering basic operations such as “turning off the power” and
“Ejecting the CD” (see the Preset Operation Command list on page 24).
The Operation Commands are speaker-independent in the Standard Word mode, so the
System recognizes and responds to an Operation Command spoken by anyone in English.
In the User Word mode, then, you can use two types of commands — Operation Commands
and Access Commands.
The Operation Commands are exactly the same as you can use in the Standard Word mode,
except the fact that you have to register the commands using your own voice before use.
On the other hand, the Access Commands must be preset by yourself, and be registered by
CD your own voice. For example, you can preset an Access Command to choose a disc in
the CD changer when you say “Pop music.” The Voice Recognition System responds to your
command, giving you direct access to the disc . You need to preset what to do and what to
speak for the Access Commands.
In the User Word mode, both the Operation Commands and the Access Commands are
speaker-dependent. So, they may be any phrase in any language (English, Spanish, even
Japanese) as long as they are registered using your voice.
This fact ensures that only you can operate this receiver by your voice.
JVC Voice Recognition System
Standard Word mode User Word mode
Features:
• Registration of your voice required
before use.
• More commands available (13
Operation Commands and 12
Access Commands).
• Only your voice can be recognized.
• Any language can be recognized.
Features:
• No registration of commands
required before use.
• Only 13 Operation Commands
available.
• Anyone’s voice can be recognized.
• Only English can be recognized.
EN22-39.KD-LX50[J]/f 00.3.22, 10:40 AM 22