John Deere 75C User Manual
Page 5
Lift Capacities
(continued)
75C
Boldface italic type indicates hydraulic-limited capacities; lightface type indicates stability-limited capacities, in lb. (kg). Ratings at bucket lift hook; machine equipped with
0.36-cu.-yd. (0.28 m
3
), 30-in. (750 mm), 522-lb. (237 kg) bucket; and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do
not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on SAE J1097.
Load Point
5 ft. (1.52 m)
10 ft. (3.05 m)
15 ft. (4.57 m)
20 ft. (6.10 m)
Height
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
With 5-ft. 4-in. (1.62 m) arm, 18-in. (450 mm) rubber crawler pads, and blade on ground
10 ft. (3.05 m)
3,831 (1738)
3,831 (1738)
3,272 (1484)
3,093 (1403)
5 ft. (1.52 m)
6,520 (2957)
5,450 (2472)
3,394 (1539)
2,918 (1324)
Ground Line
6,208 (2816)
5,162 (2341)
3,240 (1470)
2,770 (1256)
–5 ft. (–1.52 m)
7,883 (3576)
7,883 (3576)
6,201 (2813)
5,155 (2338)
3,200 (1451)
2,733 (1240)
–10 ft. (–3.05 m)
5,258 (2385)
5,258 (2385)
With 6-ft. 11-in. (2.12 m) arm, 18-in. (450 mm) rubber crawler pads, and blade on ground
15 ft. (4.57 m)
2,481 (1125)
2,481 (1125)
10 ft. (3.05 m)
2,888 (1310)
2,888 (1310)
2,792 (1266)
2,792 (1266)
5 ft. (1.52 m)
5,614 (2546)
5,614 (2546)
3,425 (1554)
2,945 (1336)
2,092 (949)
1,797 (815)
Ground Line
6,223 (2823)
5,171 (2346)
3,234 (1467)
2,763 (1253)
2,027 (919)
1,734 (787)
–5 ft. (–1.52 m)
6,415 (2910)
6,415 (2910)
6,127 (2779)
5,082 (2305)
3,151 (1429)
2,683 (1217)
–10 ft. (–3.05 m)
10,613 (4814)
10,613 (4814)
6,198 (2811)
5,185 (2352)
Buckets
A full line of buckets is offered to meet a wide variety of applications. Tooth selection includes either the John Deere Fanggs
®
, Standard, Tiger, Twin Tiger, Abrasion panel,
or Flare tooth, or the ESCO (Vertalok) Standard, Tiger, Twin Tiger, or Flare tooth. Replaceable cutting edges are available through John Deere parts. Optional side cutters add
6 inches (150 mm) to bucket widths.
Bucket
Bucket
Bucket
Arm Dig Force
Arm Dig Force
Bucket
Type Bucket
Width
Capacity*
Weight
Dig Force
5 ft. 4 in. (1.62 m)
6 ft. 11 in. (2.12 m)
Tip Radius
No. Teeth
in.
mm
cu. yd.
m
3
lb.
kg
lb.
kN
lb.
kN
lb.
kN
in.
mm
Heavy-Duty
24
610
0.27
0.21
495
225
11,185
49.8
8,500
37.8
7,190
32.0
39.0
991
5
Plate Lip
30
760
0.36
0.28
522
237
11,185
49.8
8,500
37.8
7,190
32.0
39.0
991
6
36
915
0.45
0.34
544
247
11,185
49.8
8,500
37.8
7,190
32.0
39.0
991
7
Ditching
60
1525
0.75
0.57
564
256
12,465
55.4
8,845
39.3
7,435
33.1
34.1
866
0
*All capacities are SAE heaped ratings.