John Deere 75C - Manual (Page 6)

75C Engine
● Certified to EPA Tier 2 emissions
●
Auto-idle system
●
Batteries (two 12 volt), 100-min. (550 CCA)
reserve capacity
● Dual-element dry-type air filter
●
Enclosed fan guard (conforms to SAE J1308)
●
Engine coolant to –34°F (–37°C)
● Fuel filter with water separator
● Full-flow oil filter
●
Radiator trash screen
●
Muffler, under hood, with vertical curved
end exhaust stack
Hydraulic System
●
Auxiliary hydraulic valve section
● Hydraulic pilot controls
● Reduced-drift valve for boom down
●
Spring-applied, hydraulically released auto-
matic swing brake
▲ Auxiliary hydraulic and electric pilot controls
▲ Control pattern change valve
▲
Hydraulic filter restriction indicator kit
Undercarriage
● Planetary final drive with axial piston motors
●
Propel motor shields
●
Two-speed propel with automatic shift
● Track guides, front idler
● Triple semi-grouser shoes, 24 in. (600 mm)
▲
Rubber crawler pads, 18-in. (450 mm), with
backfill blade
● Undercarriage with blade
● Upper carrier roller (1)
75C Upperstructure
● Counterweight, 3,042 lb. (1380 kg)
●
Right- and left-hand mirrors
●
Vandal locks with ignition key: Cab door /
Engine hood / Fuel cap / Service doors
Front Attachments
▲ Arm, 5 ft. 4 in. (1.62 m)
▲ Arm, 6 ft. 11 in. (2.12 m)
● Centralized lubrication system
●
Dirt seals on all bucket pins
▲
Auxiliary hydraulic lines with shutoff valve
▲ Buckets: Ditching / Heavy duty / Side cutters
and teeth
▲
Hydraulic coupler
Operator’s Station
● Adjustable seat with independent control
positions (seat-to-pedals)
● AM/FM radio
● Auto climate control/air conditioner, 20,000
Btu/hr. (5.9 kW) with heater and pressurizer
●
Built-in Operator’s Manual storage compart-
ment and manual
● Cell-phone power outlet, 12 volt, 60 watt,
5 amp
●
Coat hook
●
Deluxe suspension cloth seat with 4-in.
(100 mm) adjustable armrests and lumbar
support
●
Front windshield wiper with intermittent speeds
●
Gauges (illuminated): Engine coolant / Fuel
● Horn, electric on left control lever
● Hourmeter, electric
●
Hydraulic shutoff lever, all controls
●
Interior light
● Large cup holder
75C Operator’s Station (continued)
● Machine Information Center (MIC)
●
Mode selectors (illuminated): Power modes –
two / Travel modes – two with automatic
shift / Work mode – one
● Monitor system with alarm features: Auto-
idle indicator light / Engine air cleaner restric-
tion indicator light / Engine coolant temper-
ature indicator light with audible alarm /
Engine oil pressure indicator light with audi-
ble alarm / Fluid level: Engine coolant level
indicator light and engine oil level indicator
light / Low alternator charge indicator light /
Low fuel indicator light / Preheat indicator
●
Motion alarm with cancel switch (conforms
to SAE J994)
● Propel pedals and levers
● Seat belt, 2 in. (51 mm), retractable
▲
Seat belt, 3 in. (76 mm), non-retractable
●
Tinted glass
● Transparent tinted overhead hatch with
sunshade
▲
Circulation fan
▲
Protection screen for cab lower front window
▲ Rear secondary exit window kit
▲ Window vandal protection covers
▲ 24- to 12-volt D.C. radio convertors, 10 amp
Electrical
● 30-amp alternator
●
Blade-type multi-fused circuits
●
Positive terminal battery covers
Lights
●
Work lights: Halogen / One mounted on boom /
One mounted on frame
75C EXCAVATOR
Key: ●
Standard equipment
▲
Optional or special equipment *See your John Deere dealer for further information.
CONTROL OWNING AND OPERATING COSTS
Customer Personal Service (CPS) is part of John Deere’s proactive, fix-
before-fail strategy on machine maintenance that will help control costs,
increase profits, and reduce stress. Included in this comprehensive lineup
of ongoing programs and services are:
Fluid analysis program – tells you what’s going on inside all of your
machine’s major components so you’ll know if there’s a problem before you
see a decline in performance. Fluid analysis is included in most extended
coverage and preventive-maintenance agreements.
Component life-cycle data – gives you vital information on the projected
life span of components and lets you make informed decisions on machine
maintenance by telling you approximately how many hours of use you can
expect from an engine, transmission, or hydraulic pump. This information
can be used to preempt catastrophic downtime by servicing major compo-
nents at about 80 percent of their life cycle.
Preventive Maintenance (PM) agreements – give you a fixed cost for
maintaining a machine for a given period of time. They also help you avoid
downtime by ensuring that critical maintenance work gets done right and
on schedule. On-site preventive maintenance service performed where and
when you need it helps protect you from the expense of catastrophic failures
and lets you avoid waste-disposal hassles.
Extended coverage – gives you a fixed cost for machine repairs for a
given period of time so you can effectively manage costs. Whether you work
in a severe-service setting or just want to spread the risk of doing business,
this is a great way to custom-fit coverage for your operation. And an extended
coverage contract also travels well because it’s backed by John Deere and
is honored by
all Deere construction dealers.
Customer Support Advisors (CSAs) – Deere believes the CSA program
lends a personal quality to Customer Personal Service (CPS). Certified CSAs
have the knowledge and skills for helping make important decisions on
machine maintenance and repair. Their mission is to help you implement a
plan that’s right for
your business and take the burden of machine mainte-
nance off your shoulders.
Net engine power is with standard equipment including air
cleaner, exhaust system, alternator, and cooling fan at test
conditions specified per ISO9249. No derating is required
up to 10,000-ft. (3050 m) altitude. Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE
standards. Except where otherwise noted, these specifications are based on a unit with standard equipment; 0.36-cu.-yd.
(0.28 m
3 ), 30-in. (750 mm), 522-lb. (237 kg) bucket; 24-in. (600 mm) triple semi-grouser shoes; 3,042-lb. (1380 kg) coun-
terweight; 6-ft. 11-in. (2.12 m) arm; full fuel tank; and 175-lb. (79 kg) operator.
DKAX75C Litho in U.S.A. (06-09)