JVC HR-J631T - Manual (Page 36)

36
6
q
1 2 3
4 5 6
7 8 9
0
1 2 3
4 5 6
7 8 9
0
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable (not supplied) between the
camcorder’s VIDEO OUT and AUDIO OUT connectors
and your VCR’s VIDEO IN and AUDIO IN connectors.
● When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The Mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Press NUMBER key “0” to set to AUX.
ACCESS MAIN MENU
SCREEN
4
Press MENU as many times as necessary.
ACCESS FUNCTION SET
SCREEN
5
Press CH 5∞ to place the arrow next to “FUNCTION
SET”, then press OK.
ACCESS AUX INPUT SCREEN
6
Press CH 5∞ to place the arrow next to “AUX INPUT”,
then press OK.
SELECT INPUT
7
If you are connecting the
AV cable to the
AV
connectors on the front of
the VCR
, place the arrow
next to "FRONT" by
pressing CH
5∞. If you are
connecting the AV cable to
the
AV connectors on the
back of the VCR , place the
arrow next to "REAR" by pressing CH 5∞.
EDITING
Recorder
Camcorder
Your VCR
CH
MENU
OK
NUMBER "0"
To rear panel PAUSE
connector
Mini-plug cable (not supplied)
(JVC camcorder only)
VIDEO IN
AUDIO
IN
Player
EDIT
AUDIO OUT
VIDEO
OUT
AUX INPUT
=FRONT
REAR
PRESS ( 5,∞) TO SELECT
PRESS (MENU) TO END